FS12 thru fs1ch surface mount schottky rectifier reverse voltage 20~200v forward current 1a features ? low vf schottky barrier diodes ? very low profile - typical height of 1.0 mm ? low forward voltage drop ? low leakage current ? moisture sensitivity: level 1, per j-std-020 ? aec-q101 qualified ? high temperature soldering guaranteed: 260 /10 seconds ? halogen-free according to iec 61249-2-21 definition typical applications for use of fast swiching in rf module, lighting, cellular phone, portable device, power supplies and other consumer applications. vrrm 20 30 40 60 100 150 200 v vrms 14 21 28 42 70 105 140 v vdc 20 30 40 60 100 150 200 v if(av) a ifsm a tj c tstg c if=0.5a,ta=25 0.40 0.55 0.75 if=1 a,ta=25 0.70 0.81 ta=25 200 200 150 ua ta=125 10 ma juntion to ambient r ja juntion to case r jc juntion to mount r jm note:1),the thermal resistance from junction to ambient,case or mount,mounted on p.c.b with 55mm copper pads,2 oz,fr4 pcb FS12 fs13 fs14 fs16 fs1b fs1b5h fs1ch 1.0 maximum rms voltage 30.0 - 55 to + 150 FS12 fs13 fs14 maximum dc blocking voltage maximum average forward rectified current peak forward surge current 8.3 ms single half sine- wave superimposed on rated load storage temperature range maximum ratings (ta = 25 c unless otherwise noted) parameter symbol unit maximum repetitive peak reverse voltage /w 90 20 60 volts - 55 to + 175 - 55 to + 150 maximum instantaneous forward voltage v f electrical characteristics (ta = 25 c unless otherwise noted) parameter unit fs1b fs1b5h operating junction temperature range 200 20 0.45 0.80 0.50 0.90 test conditions symbol fs16 fs1ch maximum dc reverse current at rated dc blocking voltage i r typical thermal resistance 1) 200 30 esga (sod - 123fl) www.goodark.com 1/4 2013.12-rev.a
FS12 thru fs1ch surface mount schottky rectifier reverse voltage 20~200v forward current 1a ratings and characteristics curves (ta = 25 unless otherwise noted) figure 1.forward current derating curve figure 2.maximum non - repetitive peak forward surge current figure 3. typical instantaneous reverse characteristics figure 4. typical junction capacitance figure 5. typical instantaneous forward characteristics 0 0.2 0.4 0.6 0.8 1 0 25 50 75 100 125 150 average forward rectified current, a mount temperature FS12 thru fs1b fs1b5h thru fs1ch www.goodark.com 2/4 2013.12-rev.a
FS12 thru fs1ch surface mount schottky rectifier reverse voltage 20~200v forward current 1a package outline dimensions packing information packing quantities: 3000 pcs/reel, 40 reels/box; 8mm tape, 7" reel tape & reel specification soldering footprint www.goodark.com 3/4 2013.12-rev.a dim min max min max a 0.9 1.08 0.035 0.043 a1 0 0.1 0.000 0.004 b 0.85 1.05 0.033 0.041 c 0.1 0.25 0.004 0.010 d 1.7 2 0.067 0.079 e 2.9 3.1 0.114 0.122 l 0.43 0.83 0.017 0.033 he 3.5 3.9 0.138 0.154 unit: inch unit: mm
FS12 thru fs1ch surface mount schottky rectifier reverse voltage 20~200v forward current 1a these materials are intended as a reference to assist our customers in the selection of the suzhou good- ark product best suited to the customer s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to suzhou good-ark electronics co., ltd.or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. disclaimers www.goodark.com 4/4 2013.12-rev.a
|
